Kitronic Inventor's Kit for the micro:bit - English version

Ages 10 years + / Grades 5 +

Get more from the micro:bit Kitronik's incredible Inventor's Kit! The simple way to learn about creating circuits and code.

Please Note: micro:bit is NOT included.

To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!

The Kitronik Inventor's Kit for the micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The micro:bit has a selection of pins that are located on the bottom edge of its PCB (see datasheet below for details). By using our specially designed Edge Connector Board for the micro:bit in conjunction with the breadboard (see below), it is easy to use these pins to connect additional components to the micro:bit.

No soldering is required and you can build your first circuit in minutes!

Note:

• This kit requires assembly
• This kit does not include a micro:bit
• If you purchase a micro:bit separately, you may also need to purchase a Battery Cage and a USB cable depending on which micro:bit option you purchase

Features:

• No soldering required - build your first circuit in minutes!
• Make 10 experiments included in the provided step-by-step tutorial book
• All parts are included to conduct the 10 experiments (listed below)
• Breaks out 21 accessible pins from the micro:bit using the Edge Connector Board for the micro:bit (included)
• Small Prototype Breadboard included for fast prototyping

Contains:

• 1 x Mounting Plate
• 1 x Potentiometer & Finger Adjust Spindle
• 2 x Plastic Spacer 10 mm
• 1 x Sticky Fixer for Battery Pack
• 1 x Small Prototype Breadboard
• 1 x Terminal Connector
• 4 x Push Switch
• 1 x Motor
• 1 x Transistor
• 2 x Red 5 mm LED
• 2 x Orange 5 mm LED
• 2 x Yellow 5 mm LED
• 2 x Green 5 mm LED
• 1 x RGB 5 mm LED
• 1 x Fan Blade
• 5 x 2.2KΩ Resistor
• 5 x 10KΩ Resistor
• 5 x 47KΩ Resistor
• 1 x Edge Connector Breakout Board for micro:bit
• 1 x Miniature LDR
• 10 x Male to Male Jumper Wires
• 10 x Male to Female Jumper Wires
• 1 x 47uF Electrolytic Capacitor
• 1 x Piezo Element Buzzer
• 4 x Pan Head M3 Machine Screw

Requires:

• 1 x micro:bit
• 1 x Phillips Screwdriver
• 1 x Terminal Block Screwdriver
• 1 x Micro USB Cable